In the 1990s, FV Plast was founded in the Czech Republic. The company was founded to develop and manufacture polypropylene pipes used in hot and cold water supply and heating.
This company does not stand still and develops fundamental innovations that are widely used in the production of polypropylene, for heating and water supply.
Nowadays, this Czech company is not only thriving, but is also the developer of several innovations that it successfully produces and supplies to Western companies.
Another innovation that FV Plast has introduced into the production of polypropylene pipes is the production of reinforced pipes with aluminum foil inside.
Polypropylene pipes FV Plast, with aluminum foil, are supplied to all countries of the world under the name "STABI".
Today, it is a leading company that supplies its products to more than thirty countries worldwide.
The fact that this company invests heavily in the development of new technologies and applies various types of innovations allows it to produce products of the highest quality.
Advantages of polypropylene from FV Plast
This company's entire product range has undeniable advantages that have been highly appreciated by customers and consumers:
- The pipes and their components are lightweight, which certainly makes them easier to transport.
- Easy and quick installation – welding by melting in a special iron saves time.
- Long service life of water supply systems installed thanks to polypropylene pipes.
- Resistance to corrosion.
- Prevents limescale deposits during use.
- High water permeability due to the smoothness of the inner surface.
- Any complex structure can be easily assembled thanks to various types of additional elements.
Moreover, the entire range can withstand temperatures of +95 degrees, but in some cases, they can withstand +100 with a short-term increase.
Video 1.
FV Plast pipes – where they are used
Polypropylene pipe, manufactured in the Czech Republic, is a wear-resistant and heat-resistant product that has found wide application. Not only consumers but also plumbers appreciate its practicality and cost-effectiveness.
Nowadays, many different components are used that are intended, for simple and quick installation of heating and water supply systems.
In addition to everything listed above, they are used in the installation of air ducts, since this material is relatively light in weight and has good environmental properties.
Fv Plast from the Czech Republic is a guarantee of the highest quality!
In the Czech Republic, polypropylene products are constantly tested for compliance with global and European standards. The testing centers are equipped with sophisticated equipment, which is used for testing.
Another aspect that has led to such a wide distribution of polypropylene products from the Czech Republic is that due to the high quality of these products, it can be easily hidden in plastered walls and plasterboard walls, and can also be used for installing heated floors.
FV Plast guarantees not only the quality of its products but also excellent service, delivering to all points worldwide in the shortest possible time.
Why the Czech FV Plast?
- Low price;
- Easy assembly;
- Wide range of diameters;
- Service life is 50 years;
- Polypropylene is harmless to humans and the environment.
Some features of polypropylene pipes
Before you begin assembling the structure, you need to clean the top layer, since the fitting is soldered to the top layer of the pipe.
If it is taken a reinforced pipe that is made using fiberglass reinforcement technology, then cleaning is not necessary.
Video 2.
When using a polypropylene pipe, which is intended for water supply, it is enough to wipe its end with alcohol to remove oxidation.
The company's products have received many positive reviews due to the fact that they satisfy even the highest consumer requirements.
Czech FV Plast products are used in the installation of various systems, with polypropylene products in particular demand.
Its wide range of applications is noted, thanks to its aluminum foil reinforcement. Furthermore, fittings manufactured by FV Plast, Czech Republic, allow for the installation of any configuration of pipes and components.
Engineering systems that use polypropylene, FV Plast:
- Hot and cold water supply;
- Installation of various heating systems;
- Installation of underfloor heating systems;
- Pneumatic pipelines;
- Industrial, engineering systems.
The pipe is PP-R, which is manufactured using the latest coextrusion technology and has high technical characteristics.
FV Plast products, STABI brand, are designed for installation of networks that are subject to sudden temperature changes.
Let's summarize the review of Czech polypropylene products
Thanks to the high quality achieved through the company's use of innovative polypropylene production technologies, their pipes are replacing not only steel but also copper structures. This is happening for a number of reasons:
- Polypropylene is hygienic and environmentally friendly.
- Does not come into contact with aggressive environments.
- Polypropylene product connections can withstand not only internal pressure in the system, but also external mechanical pressure.
- Their water permeability is quite high, which has a positive effect on water supply systems.
- Thanks to the aluminum reinforcement, the pipe does not expand when exposed to high temperatures and can withstand + 100O WITH.
- The service life is more than fifty years, which is not inferior to the service life of copper pipes.
- Light weight.
- Simple and easy installation.
- Excellent value for money for polypropylene products from the Czech Republic.
- They don't create noise that could cause inconvenience to ordinary people. They don't vibrate.
- Polypropylene is not subject to corrosion and therefore does not change its aesthetic qualities throughout its entire service life.
Video 3.
So, we've reviewed FV Plast's products and found that their quality and affordable price make them a top choice in consumer demand.
We've covered all the advantages; they're undeniable; the benefits are clear and undeniable. Which water supply material to choose is, of course, up to you.
By choosing FV Plast polypropylene pipes from the Czech Republic for heating, water supply, and ventilation installations, you choose not only quality, simplicity, and a low price, but also safety for your health and the health of those around you.
