A country house water supply system made from plastic pipes isn't much different from its counterpart in a regular apartment. The tricky part is that it requires not only water connections to the valves and appliances, but also an irrigation system.
The latter reason places high demands on the pump's performance and the reserve in the well.
The reality is that power outages are common in summer cottage communities. Therefore, it's essential to consider a backup water supply.
Some nuances of installing a water supply system in a summer house
The installation of a plastic water supply system for a country house is carried out as follows. In this case, water is supplied through pump, which supplies liquid from a storage tank or hydraulic accumulator.
When installing a storage tank, the liquid reserve will be equal to the volume of the reservoir tank. However, its bottom should not be located below the water intake points. This will ensure that the taps will always have water.
Using a hydraulic accumulator is more convenient because it maintains constant pressure. If a pump and automatic pressure switch are added to this device, the entire system is called a pumping station.
This system is available in summer and winter versions. The difference between the systems will be in the location of the equipment installation. and the depth of laying plastic pipes.
Which pipes are better to choose?
Until recently, this wasn't an issue. Only steel water pipes were used for summer cottages.
At the moment, metal options are practically not accepted because an excellent alternative has appeared - plastic analogues.
There's no better option for a country house. These pipes won't rust or deteriorate in cold temperatures.
When purchasing, you just need to take into account the fact that plastic water pipes come in different varieties:
- HDPE (low-density polyethylene). These products are attractive because they are designed without auxiliary elements. Fittings for working with these materials are threaded and easily tightened by hand.
- PVC pipes are very common in country houses. They're less expensive than the previous option and are held together using cold soldering (glue). The seam on these pipes is strong and reliable.
- PPR. This type of plastic pipe can be used for cold and hot water and heating systems. These materials are joined using soldering and couplings.
Price of plastic pipe
When purchasing materials for work, it is recommended to exercise extreme caution. Plastic products, especially the ends, should be free of roughness and unevenness. Workpieces should be perfectly rounded.
When installing a water supply system using plastic pipes, you need to know that its price compares favorably with that of a pipeline made of metal materials.
The price of PP pipe blanks ranges from $1 to $7 per linear meter. Fitting prices are also approximately within this range.
The most expensive materials of this type are supplied by German and Italian companies. Products from Turkish and domestic manufacturers are significantly cheaper.
To ensure the smooth operation of your pipeline, it is recommended to purchase only high-quality products from trusted manufacturers.
This product is a little more expensive, but it is fully justified by the long and reliable operation of the built system.
Building a plumbing system yourself
See the end of the article for detailed video instructions on how to install a water supply to a private home.
It's not difficult to construct a plastic water supply system for your country house if you carefully study all the intricacies of this business.
- First, you need to choose a water source. The cheapest option is to build a well. A sand well can also be suitable. However, the best method is an artesian well. Its lifespan is almost 50 years.
- Summer water supply system. As the name suggests, this system is used only in the summer. This system can be either portable or permanent. Most often, in this case, the hoses are simply laid along the ground. For a permanent summer system, the pipes are buried underground to avoid obstruction. One drawback of this system is the slope required to connect to the main water supply. A drain valve is installed at the lowest point of the water supply system to drain the water during the winter.
- Winter type of pipeline system. This design is a permanent system that can be used year-round. Submersible pumps are installed to supply liquid. The capacity of this mechanism is selected based on the depth of the water supply. A power source will also be required for this equipment. The cable and water supply can be housed in a single casing made of plastic waste pipe blanks. This provides excellent protection against freezing and mechanical stress.
Organization of watering
A water supply system for irrigation in a summer house is a fundamental necessity. The "summer house" phase of life begins with the water supply.
As already mentioned, there are temporary and permanent systems. But the construction of either begins the same way: with project development.
When designing, the following nuances must be taken into account:
- Plastic pipe rolling stock is installed at an angle relative to the water intake point.
- They are brought to the surface only in consumption areas.
- The use of polypropylene materials will allow for easy installation and modification of the structure.
- The trench for a summer water supply should be 40 centimeters deep. It's recommended to increase this depth under existing garden beds, otherwise the pipe network may be damaged during planting.
- For a detachable type, rubber hoses are often used, connected with jumpers or special clips. This type of fastening allows two pieces of plumbing to be separated or fastened together in a single movement.
- The placement of the beds determines the number of watering points. To facilitate watering, it is recommended to have the water pipe in at least five locations.
Building a DIY irrigation system
Building a DIY irrigation system isn't difficult. Once the design is developed, excavation work begins.
A submersible pump is lowered into a well or installed in a nearby, insulated pit. It can also be installed directly inside the house.
If necessary, a pressure testing device and pump are installed. After this, the pipeline is extended through the trench to other water drawoff points.
It is recommended to install the battery powering the pump mechanism in a protected cable. Electrical safety is essential in any case.
In this case, it is impossible to do without installing sealed connectors and grounded, moisture-protected sockets.
An emergency shut-off device is installed at the pipe's entrance to the building. After checking the operation of the country house pipeline, the holes can be filled with soil. Now you can proceed with installation inside the house.
The device inside
To ensure comfortable use of the pipeline, it is necessary to ensure hot water supply.
This is achieved by installing electric or gas heating units, either storage or instantaneous. In a summer house, a storage water heater is more cost-effective.
We invite you to learn more about this, What is the difference between a flow-through water heater and a storage water heater?, their pros and cons.
Polypropylene pipe networks won't need repairs anytime soon. This is due to the excellent technical characteristics of these products.
These blanks are easy to install, they are not affected by temperature changes, and the joints do not reduce their tightness at low temperatures.
IMPORTANT! When installing a water supply system in a country house, it's essential to test a water sample from the source for purity. Based on the laboratory test results, a multi-level filtration system is installed.
A plastic water supply system for a country house will bring convenience and comfort to the standard of living outside the city.
Modern materials make it possible to build a system that will allow you to enjoy all the benefits of modern civilization with your own hands in a short time.
And the cost of polypropylene materials will not create large financial costs.
