Polypropylene pipe products have firmly established themselves as leaders in the construction of water supply and heating mains.
A wide range of excellent technical characteristics makes these materials extremely popular..
Many companies produce them. Polypropylene pipes from the Czech Republic occupy a special place in this product line.
After the clear leader in this field, German manufacturers, Czech products rank second. Their high-quality products differ from their German counterparts only in their lower price, but the quality of these products is just as excellent.
Ecoplastic pipe
Czech representatives WAWIN Ecoplastik They produce a product that is considered the standard for global polypropylene networks. Since its introduction to the global market, this system has demonstrated superior performance.
Its popularity is due to the excellent quality of polypropylene pipes and fittings.
Ecoplastic polypropylene pipes from the Czech Republic are used for the installation of networks supplying various waters, for central and underfloor heating.
- View PN 10 used in the cold water supply line and in the underfloor heating network.
- PN 16 They are used for cold water supply lines, where pressure is high. They are also used for polypropylene central heating mains with lower pressure ratings.
- PN 20 used for the construction of hot water supply pipelines and heating systems.
Ecoplastic pipes from the Czech Republic are manufactured in the following range:
- All-plastic PN10, PN 16, PN 20.
- Ecoplastik Stabi is a multilayer version of PN 20. It consists of plastic and an aluminum foil layer.
- Polypropylene Fiber.
- Combined and all-plastic connecting elements.
Ecoplastic plastic pipes produced in the Czech Republic are widely used in domestic heating and water supply systems, in agriculture and for industrial needs.
WAVIN Ecoplastic pipe and fittings meet sanitary and hygienic standards. The use of plastic eliminates rust.
Polypropylene has excellent resistance to aggressive chemicals and is suitable for installation in the food and chemical industries.
They boast a long service life. The pipeline, which consists of polypropylene pipes and fittings from the Czech Republic, operates virtually silently.
New product from Wavin Ecoplastic
EVO. These are all-plastic PP-RCT rolled pipes. This recent offering from manufacturers is designed for networks supplying water at varying temperatures.
PP-RCT is the latest generation of polypropylene, the fourth type. Previously, this material was used only for the production of premium multilayer products.
The main advantage of the new product is its high throughput.
FV-Plast polypropylene pipes and fittings
This type of pipe is considered a hallmark of Czech quality, proven by a 15-year history. This trading and manufacturing company is known in 30 countries worldwide.
Purchasing FV-plast pipes and fittings made in the Czech Republic is a smart decision. This company's pricing policy is considered very customer-friendly.
Advantages:
- A system made from these materials will last for decades.
- They are environmentally friendly.
- A distinctive feature of this type is the ease of installation, regardless of the complexity of the line.
- Affordable price of products.
The quality of this type of product is absolutely not inferior to the best world analogues.
The service life of hot water pipelines is at least 25 years, and in cold water supply networks they can last up to 50 years.
Glass fiber reinforced polypropylene pipes, manufactured in the Czech Republic, are safe and highly reliable. They also boast excellent sound insulation.
They are also distinguished by their ability to withstand short-term temperature increases up to 100 degrees.
They are not destroyed by chemicals, and the presence of an aluminum layer is significant reduces the linear elongation of workpieces to a certain extent.
Reinforced products of Czech manufacture
Reinforced polypropylene pipes for heating produced in the Czech Republic are popular in many countries.
Reinforced options are the most modern method for installing heating pipes. They are much lighter than their metal counterparts and offer excellent corrosion and chemical resistance.
Polypropylene – It is a plastic with a high coefficient of thermal expansion.If it's exposed to high pressure and hot liquid, it will deform over time. To reduce thermal elongation, PP blanks are reinforced with fiberglass and aluminum.
Fv Plast polypropylene pipes from the Czech RepublicFiberglass-reinforced pipes are widely used in the construction of heating mains and networks that supply various types of water. These reinforced products offer the following advantages:
- High heat resistance. They can withstand temperatures up to 95 degrees Celsius. They are also resistant to short-term temperature fluctuations up to 110 degrees Celsius.
- The inner surface of such blanks is not covered with deposits, so the product’s performance does not deteriorate over time.
- The liquid that passes through such a line does not become contaminated.
- This reinforced product is not afraid of exposure to chemicals.
- High protection against electrochemical corrosion.
- Low heat loss and resistance to condensation. These thermal insulation properties play a crucial role in the operation of the pipeline.
- The liquid passing through the line does not become toxic.
- The products do not present any particular problems during installation.
- The small weight of the products allows for a reduction in financial and labor costs during transportation.
- Long service life and excellent wear resistance. When used according to manufacturer recommendations, reinforced materials will last for decades.
Video
Glass fiber-reinforced polypropylene pipes manufactured in the Czech Republic have lower thermal conductivity than aluminum-reinforced products. Therefore, they are recommended for open-pit installations. See the full list of polypropylene product manufacturers.
Czech soldering iron for plastic
A plastic soldering iron is a tool used for installing plumbing and heating pipes. Today, soldering is considered the most reliable and long-lasting connection.
The Czech company DYTRON is a leading manufacturer of soldering irons for welding plastic materials. Their line of soldering irons includes socket welders, butt welders, and electrofusion joint welders.
Video
In 1995, experienced, highly qualified designers with many years of experience created a bell-shaped soldering iron for welding with a microprocessor control type.
The Czech-made polypropylene soldering iron was immediately noticed by professional experts, and was subsequently awarded the Golden Simet 95 prize.
DYTRON is consistently improving the technical performance of its soldering irons and expanding its product range. At the same time, they constantly listen to customer feedback and comments.
This approach allows us to produce units that are considered very reliable, convenient, and long-lasting. These soldering irons for connecting plumbing and heating systems are available in flat and rod-type versions.
Power ratings are available at 650, 850, and 1200 watts. Soldering iron tips range from 16 to 125 mm. All DYTRON devices come with a warranty and all relevant certifications.
Conditions for laying pipelines using Czech polypropylene pipes
Video
- installation in grooves;
- installation in an installation partition;
- installation in the floor, ceiling, walls;
- installation along the wall in different options (open or closed);
- installation in an installation shaft or recess.
IMPORTANT! Outdoor pipeline installation options must be calculated individually for each individual situation.
Fastening of pipelines made of Czech pipes is carried out by installing fixed or movable supports, and also taking into account the linear elongation of the workpieces (for this, metal clamps and plastic supports are used).
Insulation of pipelines
Insulation of Czech rolled pipe materials is produced using polyurethane, polystyrene or foamed polyethylene.
Video
They are considered the most suitable option for use in the installation of domestic and industrial heating systems and supply of water of different temperatures.
